University of Georgia – Fenders
Event: 2025 IQS
Category: Overall
Subcategory: Fenders
This table shows this tractor’s tech status for each rule in this subcategory. Click a rule number to see the rule-specific detail page.
| Rule # | Description | Status |
|---|---|---|
| (Sec 9.1) | Fenders must be functional, sturdy, and rigidly mounted to protect the driver from any wheels that the operator can contact from the operator’s station during operation. The fenders must meet the following requirements: (Sec 9.1) | Pass |
| (Sec 9.1.1) | Cover at least two-thirds the width of all affected tires (Sec 9.1.1) | Pass |
| (Sec 9.1.2) | Include inner fender walls to protect the operator from inadvertent contact with tires. (Sec 9.1.2) | Pass |
| (Sec 9.1.3) | Minimum radial coverage of 90 degrees and positioned so they best protect the operator. (Sec 9.1.3) | Pass |
| (Sec 9.1.4) | Deflect less than 0.5-inches (12.7 mm) towards the tire at the outermost edge when a 5-lb (2.27-kg) weight is placed on the fender over the centerline of the outermost tire. (Sec 9.1.4) | Pass |
| (Sec 9.1.5) | Minimum clearance of 1.2 inches (30 mm) between the component and tire/rim peripheral area (Sec 9.1.5) | Pass |
| (Sec 9.1.6) | Minimum clearance of 0.6 inches (15 mm) between the component and the inside of the tire. (Sec 9.1.6) | Pass |