McGill University – Driveshafts
Event: 2025 IQS
Category: Drivetrain
Subcategory: Driveshafts
This table shows this tractor’s tech status for each rule in this subcategory. Click a rule number to see the rule-specific detail page.
| Rule # | Description | Status |
|---|---|---|
| (Sec 10.10) | Driveshafts, regardless of length, must include safety loop(s) to secure the driveshaft if a component were to break or loosen during operation. The loop(s) must meet the following requirements. (Sec 10.10) | Pass |
| (Sec 10.10.1) | Be situated such that they equally divide the length of the driveshaft within a tolerance of 2-inches (50-mm). (Sec 10.10.1) | Pass |
| (Sec 10.10.2) | Maximum distance between loops is 18-inches (457-mm) (Sec 10.10.2) | Pass |
| (Sec 10.10.3) | Be fabricated from steel or aluminum. (Sec 10.10.3) | Pass |
| (Sec 10.10.4) | Driveshafts beyond final drive reduction are excluded. (Sec 10.10.4) | Pass |