University of Tennessee Martin – Brake test
Event: 2025 IQS
Category: Safety A
Subcategory: Brake test
This table shows this tractor’s tech status for each rule in this subcategory. Click a rule number to see the rule-specific detail page.
| Rule # | Description | Status |
|---|---|---|
| (Sec 2.6.1) | This includes weights and mid-body chassis clearance while driving on and off the scales or brake test stand. (Sec 2.6.1) | Pass |
| (Sec 2.6) | Vehicles must meet the minimum approach and departure angles as depicted in Figure 1 below. (Sec 2.6) | Pass |
| (Sec 7.25) | Vehicles must have working service brakes. (Sec 7.25) | Pass |
| (Sec 7.26) | The service brakes must be capable of fully locking the tires, with the vehicle fully ballasted, on an incline of 20° without sliding. (Sec 7.26) | Pass |
| (Sec 7.27) | A dynamic brake will NOT be allowed unless it is in conjunction with working service brake(s). (Sec 7.27) | Pass |
| (Sec 7.28) | Outboard brakes (outside of final drives, U-Joints, and CV joints) are required on all wheels on the rear most drive axle. (Sec 7.28) | Pass |