University of Tennessee Martin – Rule (Sec 7.14.1.1)
Event: 2025 IQS
Category: Safety B
Subcategory: Hydraulics
Rule Text
The schematic must include system components (tank, pumps, valves, motors, relief valves, check valves, test ports, etc.) drawn with standard symbols (refer to ISO 1219), as well as specifications pertaining to those components that dictate system operating characteristics (relief valve setting, flow from a pump, check valve ratings, orifice diameters, pump speed ratio, etc.). See example in Figure 4, below. (Sec 7.14.1.1)
Status
Pass
Images
No images yet
Comments
No comments yet