University of Nebraska – Exhaust
Event: 2025 IQS
Category: Safety B
Subcategory: Exhaust
This table shows this tractor’s tech status for each rule in this subcategory. Click a rule number to see the rule-specific detail page.
| Rule # | Description | Status |
|---|---|---|
| (Sec 6.24) | Exhaust systems must be guarded per ISO 5395-3 Section 4.12, with the exception that hoods may not be used as guards. Guards should be constructed of high-quality materials, so they do not deflect under reasonable load and contact any exhaust component. (Sec 6.24) | Pass |
| (Sec 6.24.1) | Guarding may be attached to the exhaust using non-destructive methods. Welding or drilling holes is not allowed. (Sec 6.24.1) | Pass |
| (Sec 6.24.2) | Guarding cannot affect the flow of exhaust. (Sec 6.24.2) | Pass |
| (Sec 6.25) | Exhaust pipes and exhaust gas must be positioned and directed such that they will not affect the vehicle operator, track personnel and/or sled operator. In addition, exhaust discharge may not be pointed downward or within 45 degrees to the rear of the vehicle. (Sec 6.25) | Pass |