University of Guelph – Operator station
Event: 2024 IQS
Category: Safety A
Subcategory: Operator station
This table shows this tractor’s tech status for each rule in this subcategory. Click a rule number to see the rule-specific detail page.
| Rule # | Description | Status |
|---|---|---|
| (Sec 2.12) | Operator safety must be considered in the design and layout of all controls and components. Reference ISO 3411 and/or ISO 26322 to ensure that vehicle designs safeguard the operator from injury due to contact with any components including tires during normal operation and during conditions of instability (wheel hop, front-end rear-ups, etc.). Designs must ensure that no part of the operator can contact exhaust pipe(s) when leaning forward or back. (Sec 2.12) | Not Started |
| (Sec 2.12.a) | Operator cannot come into contact with tires during normal operation and conditions of instability. (Sec 2.12.a) | Not Started |
| (Sec 2.12.b) | Operator cannot come into contact with unshielded exhaust components when leaning forward or back. (Sec 2.12.b) | Not Started |
| (Sec 4.4) | Vehicles not equipped with a steering wheel must incorporate a grab handle and it must be positioned so that the driver can use it as support when operating the vehicle. (Sec 4.4) | Not Started |
| (Sec 4.4.1) | If vehicle uses a dual stick drive, the armrests must be positioned such that an operator can use them for support while operating vehicle (Sec 4.4.1) | Not Started |
| (Sec 4.5) | Vehicles must include operator footrests; they must be sturdy and rigidly mounted to the vehicle frame/chassis. (Sec 4.5) | Not Started |
| (Sec 4.5.1) | They must protect the operator from inadvertent contact with all tires and the ground. (Sec 4.5.1) | Not Started |