Cal Poly State University – Fenders
Event: 2024 IQS
Category: Overall
Subcategory: Fenders
This table shows this tractor’s tech status for each rule in this subcategory. Click a rule number to see the rule-specific detail page.
| Rule # | Description | Status |
|---|---|---|
| (Sec 9.1) | Fenders must be functional, sturdy, and rigidly mounted to protect the driver from any wheels that the operator can contact from the operator’s station during operation. The fenders must meet the following requirements: (Sec 9.1) | Not Started |
| (Sec 9.1.1) | Cover at least two-thirds the width of all affected tires (Sec 9.1.1) | Not Started |
| (Sec 9.1.2) | Include inner fender walls to protect the operator from inadvertent contact with tires. (Sec 9.1.2) | Not Started |
| (Sec 9.1.3) | Minimum radial coverage of 90 degrees and positioned so they best protect the operator. (Sec 9.1.3) | Not Started |
| (Sec 9.1.4) | Deflect less than 0.5-inches (12.7 mm) towards the tire at the outermost edge when a 5-lb (2.27-kg) weight is placed on the fender over the centerline of the outermost tire. (Sec 9.1.4) | Not Started |
| (Sec 9.1.5) | Minimum clearance of 1.2 inches (30 mm) between the component and tire/rim peripheral area (Sec 9.1.5) | Not Started |
| (Sec 9.1.6) | Minimum clearance of 0.6 inches (15 mm) between the component and the inside of the tire. (Sec 9.1.6) | Not Started |