University of Manitoba – Overall
Event: 2023 IQS
Category: Overall
Subcategory: Overall
This table shows this tractor’s tech status for each rule in this subcategory. Click a rule number to see the rule-specific detail page.
| Rule # | Description | Status |
|---|---|---|
| (Sec 2.3) | The vehicle must meet the following size and weight constraints (Sec 2.3) | Not Started |
| (Sec 2.3.1) | Maximum width of 72 inches (1829 mm) (Sec 2.3.1) | Not Started |
| (Sec 2.3.2) | Maximum length of 96 inches (2348 mm) forward of the centerline of the rear axle (Sec 2.3.2) | Not Started |
| (Sec 2.10) | Wheelbase changes are not allowed unless they can be accomplished by the driver from the seat. (Sec 2.10) | Not Started |
| (Sec 16.2) | All teams must display the logo of the competition, major sponsors and their school’s name and number on at least three sides of the vehicle. (Sec 16.2) | Not Started |
| (Sec 16.2.1) | Sponsor decals will be supplied at the event and must be used. (Sec 16.2.1) | Not Started |
| (Sec 16.2.2) | The team name must be legible and printed in letters that are at least 2 inches tall; an abbreviation or acronym is acceptable. (Sec 16.2.2) | Not Started |
| (Sec 16.2.3) | The team number must be legible and printed in numbers that are at least 4 inches tall. (Sec 16.2.3) | Not Started |
| (Sec 16.2.4) | All decals must be in place in order to complete technical inspection. (Sec 16.2.4) | Not Started |
| (Sec 16.2.5) | Sponsor decals must not be modified or trimmed in any way. (Sec 16.2.5) | Not Started |
| (Sec 16.3) | Teams are responsible for making sure that all logos are displayed during all pulls. Failure to comply may result in team disqualification. (Sec 16.3) | Not Started |
| (Sec 16.4) | Specific decal sizes and quantities will be listed in the Competition Handbook or other ASABE mailing. (Sec 16.4) | Not Started |